Automatic 3 Zone Thermal Shock Test Instrument /High and Low Temperature Environmental Test Chamber

Basic Info.

Model NO.	HD-E703
Display	Digital
Control	Manual Control
Weight	100-500Kg
Power Source	AC220V
Damper Device	Forced Air Drived Damper
Outside Dimension	170235 182cm
Ambient Temperature	0 Centigrade Degrees to 30centigrade Degrees
Controller	Oyo-8226
Cooling Method	Air or Water
Available Capacity	50L, 80L, 108L 216L, 252L, ...
Interal Dimension	(W* H* D) 60* 70* 60cm
Model	HD-E703
Warranty Period	12 Months
Certificate	ISO9001: 2008
Transport Package	Strong Wooden Case
Specification	ISO9001: 2008
Trademark	Haida
Origin	China
Production Capacity	150 Sets/Month

Product Description

Automatic 3 Zone Thermal Shock Test Instrument /High and Low Temperature Environmental Test Chamber
Product Introduction:Thermal Shock Test Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm.The equipment is widely used in metal, plastic, rubber, electronics and other materials and it can be used as an important reference for improving product quality. It meets the standard of MTL, IEC, JIS, GJB…Main Parameters

Test method	Pneumatic operated door switch 3 chambers
Inner dimension (WDH)	500450450mm
External dimension (WDH)	138013701980mm
Temperature range	-40 ~ +80ºC
High temperature chamber pre-heating range	60 ~ 100ºC
Heating speed	+60→+100ºC about 10 minutes
Low temperature chamber pre-cooling range	-65 ~ 0
Cooling speed	Ambient →-65ºC about 65 minutes
Temperature deviation	±3ºC
Thermal recovery time	Within 5 minutes
External material	Antirust processing cold-rolled steel sheet
Internal material	SUS#304 stainless steel
Thermal insulation material	Polyurethane foam and fiberglass
Coolant	R404A / R23
Cooling method	Air cooling
Pressure	0.2 - 0.5Mpa
Power supply	Three phase, 380V, 50Hz

Product Detail
Advantage1.TM 2101 intelligent automatic detection of the operating system, (can adapt to all current PC)2.High-tech, low noise3.Humanized industrial design, easy to place and transport4.The world famous brand core precision components5.Security protection system6.Valid test trip length (modifiable)7.3 seconds fast temperature change8.2 chambers temperature conversion faster and save time9.3 chambers in addition to a low temperature test , high temperature test, there can be done at room temperature testFeatures:Perfect appearance and easy to operate.Japan LCD English microcomputer temperature controller, with high memory capacity, can save 100 programs, max 9999 cycles, each cycle max time 999hrs.Three chamber structures, high temperature chamber, low temperature chamber and test chamber, control automatically, stay and switch time adjustable.Perfect protection alarm functions: short-circuits, Leakage, over temperature of work chamber; compressor over pressure, over load, short water…Control interface will display alarm reason and provide check methods, machine has emergency stop button.Cold and hot shock temperature recover within 5 minutes, which complies with MTL, IEC, JIS, GJB and other international standards. With RS-232C communication port for connecting PC to control, record and save test report. High Temperature Chamber:Heater: NI-CR alloy electric heaterDraught fan: Share centrifugal fan when high temperature and do environmental temperature, preheating with axial flow fan. Low Temperature Chamber:Cooler: Fin cooler, regeneratorDraught fan: centrifugal fan Drive Device:Pneumatic cylinder: Drive the air door of high, environmental, low temperatureAir compressor: Provide the compressed air for driving pneumatic door (supplied by buyer) Refrigerating Device:Cooling method: mechanical compression refrigerationRefrigeration compressor: Semi-closed pistonRefrigerant: R23/R404ACondensation: Stainless steel welded plate heat exchanger Additional Functions: Timer, over temperature and power failure protection, alarm, record test curve, emergency stop, display test timeCirculated cooling water: pressure: 0.2~0.4MPa, temperature: ≤30ºCStandard configuration: indication lamp of test chamber, time meter, test hole for wire routing, 6pcs castor, 4pcs adjust wheel. Safety Devices:Leakage and breaker, over temperature, low temperature protect device, exhaust valves, sample power control terminal, over temperature protection of high and low chamber, compressor over pressure, over heat protection, out of water relay, heat relay of fan, compressed air pressure switch, fuse, external alarm terminalAbout UsHaida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.

Products

Automatic 3 Zone Thermal Shock Test Instrument /High and Low Temperature Environmental Test Chamber

Basic Info.

Product Description